Vauxhall Workshop Service and Repair Manuals

Con-rod Bearing Play, Check (Determine Bearing Play with Micrometer and Inside Micrometer)

Note:   Con-rod and crankshaft are removed.

  Install

Con-rod bearing cap with con-rod bearing shell to con-rod – tightening torque 25 Nm / 18 lbf. ft. + 30°.

The bolts can be reused for checking the con-rod bearing play.

  Measure

Formula for calculating the average con-rod bearing diameter: I + II + III   3 Example: I   42.738 mm   II   42.732 mm   III + 42.741 mm       128.211 mm divided by 3 = 42.737 mm The average con-rod bearing diameter is 42.737 mm.

The con-rod bearing journal diameter is measured with a micrometer at points I and II and then calculated. Formula for calculating the average con-rod bearing journal diameter: I + II   2 Example: I   42.729 mm   II + 42.725 mm       85.454 mm divided by 2 = 42.727 mm The average con-rod bearing journal diameter is 42.727 mm.

The con-rod bearing play is calculated from the difference in diameter between the con-rod bearing bore and the con-rod bearing journal.

Permissible con-rod bearing play: 0.019 to 0.071 mm.