Engine, Repair Using Short-block
Remove
Remove engine – see operation "Engine, Remove and
Install".
Detach cooling module from front axle body.
Suspend engine with transmission on workshop crane and detach
from front axle body.
Install
Attach Adapter KM-412-10 to cylinder block – remove
requisite attaching parts.
Install engine with transmission to Overhaul Stand KM-412.
Remove
Remove transmission from cylinder block.
Remove all cable and hose connections from engine.
Remove all attaching parts from engine – see corresponding
operations.
Install
Emboss engine number in cylinder block (arrow) with numbers
punch.
Install all attaching parts on engine – see corresponding
operations. Required tightening torques – see "Recommended
Torque Values".
Attach all cable and hose connections to engine.
Attach transmission to cylinder block.
Remove
Remove engine from overhaul stand and adapter from engine.
|
|
Install
Attach engine with transmission to front axle body.
Unhitch engine from workshop crane.
Attach cooling module to front axle body.
Install engine – see operation "Engine, Remove and
Install".
|