Detach turbocharger oil feed line (1) from turbocharger and
remove upwards.
Install
Attach turbocharger oil feed line to turbocharger with new seal
rings – tightening torque 20 Nm / 15 lbf. ft.
Attach heat shields to exhaust manifold and reversing manifold.
Attach engine cover to cylinder head cover.
Attach turbocharger oil feed line to cylinder block –
tightening torque 20 Nm / 15 lbf. ft.
Install lower engine compartment cover – see operation
"Lower Engine Compartment Cover, Remove and Install" in group
"A".
|