Attach friction washer (2) and thrust bearing assembly (1) to
rear ring gear with freewheel F0 with mounting grease.
Thread rear ring gear with freewheel F0 (5) on planet carrier
ring gear with planetary gears.
Install thrust washer (3) and thrust bearing assembly (4).
Install multi-plate clutch assembly C0 and C3 – see
operation "Multi-plate Clutch Assembly C0 and C3, Remove and
Install (AF 13-II)".
Install multi-plate clutch assembly C1- see operation
"Multi-plate Clutch Assembly C1, Remove and Install (AF
13-II)".
Install transmission – see operation "Transmission, Remove
and Install (AF 13-II/AF 17)".
|