Insert fluid cooler by-pass valve (2) with spring (1) in centre
valve body.
Insert pressure regulator valves (6 and 7).
Insert lock balls (3 and 5).
Remove fluid strainer (4).
Insert valve body plate (8) and gaskets No. 1 and No. 2 of rear
valve body (9) into rear valve body No. 1.
Turn rear valve body No. 1.
Attach rear valve body No. 1 to centre valve body with 3
fastening bolts (10) – tightening torque 7 Nm / 5 lbf.
ft.
Caution
Handle all parts carefully as the individual parts are not
available from suppliers.
|