Insert end shield (1) into transmission – see operation
"Gasket for End Shield, Replace – F13/F17/F17+/F18".
Install end shield cover (2) – see operation "Gasket for
End Shield, Replace (F13/F17/F17+/F18)".
Install reversing lamps switch (4) with new seal ring –
tightening torque 20 Nm / 15 lbf. ft.
Install gearshift cover (3) – see operation "Gearshift
Cover, Remove and Install and/or Seal (F13/F17/F17+/F18)".
Inspect
Check transmission fluid level – see operation
"Transmission Fluid Level, Check and Correct
(F13/F17/F17+/F18)".
|