|
Servo Motors for Doors, Remove and Install Control
Unit for Central Door Locking/Anti-theft Warning System, Remove and
Install
Servo Motors – Doors, Remove and Install
Door servo motors and door lock are one-piece units – see
operation "Lock – Front Door, Remove and Install" in group
"C".
Control Unit Central Door Locking/Anti-Theft
Warning System, Remove and Install
 Remove
|
Lower inner panelling A – Pillar, – see operation
"Inner Panelling A – Pillar, Lower, Remove and Install" in
group "C".
Release wiring harness plug (1) and wiring harness plug (2) and
disconnect, 2 nuts (arrow), control unit.
|
|
Install
Control unit, wiring harness plug, lower A-pillar inner
panelling.
When replacing control unit for central door locking system /
anti-theft warning system, it is necessary to program using Tech 2
– see Checking Procedure "Astra-G Body, Central Door Locking
System with ATWS (electronic)".
|
