|
Replace wing bracket
 Remove
| 1. |
Detach attaching parts
|
| 2. |
Mark position of wing bracket (1)
|
| 3. |
Drill out wing bracket (2)
|
|
|
Install
| 4. |
Prepare the wing bracket
|
| 5. |
Adjust wing bracket (2)
Note: Align wing
bracket with marking (1) and use a suitable tool to secure it.
|
|
|
| 6. |
MIG brazing of wing bracket
Note: Observe the
specification for welded, brazed and riveted joints. Only clean the
seams, do not grind them.
|
| 7. |
Seal body, weld and brazing seams
Note: Observe corrosion
protection measures for seam seals.
|
| 8. |
Apply protective wax
Note: Observe
protective wax corrosion protection measures.
|
|
