|
Servo Motor – Mixed Air Valve, Remove and
Install (LHD)
 Remove
| 1. |
Disconnect battery.
Note: Only upon
replacement of servo motor.
|
|
| 2. |
Remove inner panelling for lower driver's side instrument panel
padding
|
| 3. |
Remove air duct footwell (3) front passenger's side
| • |
Remove body-bound rivet (2)
|
|
|
| 4. |
Separate wiring harness plug for mixed air valve servo motor
(2)
| • |
Release and disconnect wiring harness plug
|
|
|
|
Install
| 6. |
Fit servo motor
Note: The servo motor
can only be fitted in one position.
|
| 7. |
Connect wiring harness plug for servo motor on mixed air
valve
|
| 8. |
Air Duct – Driver's Side Footwell, Install
| • |
Install body-bound rivet
|
|
| 9. |
Install inner panelling for lower driver's side instrument
panel padding
|
| 10. |
Connect battery.
Note: Only upon
replacement of servo motor.
|
| 11. |
Program volatile memories
Note: Only upon
replacement of servo motor.
|
| 12. |
Perform function check
|
|
