vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Coolant Temperature Sensor > < Replace calibration switch for ECC and SAC kinematic plate

Astra H

Remove and refit valve for glove compartment cooling

  Remove

1.   Remove glove compartment
•   Unscrew 4x bolt (1)
•   Separate wiring harness plug
Object Number: 3446387 Size: DEFAULT


2.   Remove valve for glove compartment cooling (1)
•   Unclip valve
– Unclip 2x clip
Object Number: 3446419 Size: DEFAULT


  Install

3.   Install valve for glove compartment cooling
•   Clip in valve
4.   Install glove compartment
•   Connect wiring harness plug.
•   4x tighten bolt

Coolant Temperature Sensor > < Replace calibration switch for ECC and SAC kinematic plate