Test
|
Work Order Description
|
Nominal Value
|
T001
|
Tester Display Program ECU
|
- Press corresponding key in the system main menu to call up Programming functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
- Delete trouble codes after programming successfully.
|
Programming okay?
|
Concerned Terminals: -
|
|
T002
|
Tester Display Reset ECU
|
- Press corresponding key in the system main menu to call up Programming functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
- Delete trouble codes after programming successfully.
|
Programming okay?
|
Concerned Terminals: -
|
|
T003
|
Tester Display Program Mid Speed CAN-Bus Config.
|
- Press corresponding key in the system main menu to call up Programming functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
- Delete trouble codes after programming successfully.
|
Programming okay?
|
Concerned Terminals: -
|
|