vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
B-028 Programming UEC > < B-026 Programming TCM

Astra H

B-027 - Programming TPMS

Test

Work Order Description

Nominal Value
T001 Tester Display Program ECU
  • Press corresponding key in the system main menu to call up Programming functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
  • Delete trouble codes after programming successfully.

Programming okay?
Concerned Terminals:
-
Yes: No:
T002 Tester Display Reset ECU
  • Press corresponding key in the system main menu to call up Programming functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
  • Delete trouble codes after programming successfully.

Programming okay?
Concerned Terminals:
-
Yes: No:
T003 Tester Display Program Low Speed CAN-Bus Config.
  • Press corresponding key in the system main menu to call up Programming functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
  • Delete trouble codes after programming successfully.

Programming okay?
Concerned Terminals:
-
Yes: No:
T004 Tester Display Learn DDS(Deflation Detect.System)
  • Press corresponding key in the system main menu to call up Programming functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
  • Delete trouble codes after programming successfully.

Programming okay?
Concerned Terminals:
-
Yes: No:
T005 Tester Display TP Sensor Exchange (Tyre Pressure)
  • Press corresponding key in the system main menu to call up Programming functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
  • Delete trouble codes after programming successfully.

Programming okay?
Concerned Terminals:
-
Yes: No:
T006 Tester Display Learn New TP Sensors
  • Press corresponding key in the system main menu to call up Programming functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
  • Delete trouble codes after programming successfully.

Programming okay?
Concerned Terminals:
-
Yes: No:





B-028 Programming UEC > < B-026 Programming TCM