Vauxhall Workshop Service and Repair Manuals

Test

Work Order Description

Nominal Value

• Ignition ON
• Press corresponding key in the system main menu to call up Actuator-Test functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.

• Press soft key ON

Return pump operating

• Press soft key OFF

Note:

The return pump will be automatically deactivated after 3 s .

Return pump deactivated

• Vehicle jacked-up so that the wheels can turn freely
• Parking brake released
• Selector lever in position N
• Ignition ON
• Press corresponding key in the system main menu to call up Actuator-Test functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.

Note:

During the last check in this actuator test (PRESSURE RELEASE function) - after the check of the return pump - a display inquires whether the wheel being checked can be turned.

Compared to previous requests in the actuator test, the wheel can only be turned at this point with more force than in previous checks. However, the wheel should in no case lock.

Test okay?

• Vehicle jacked-up so that the wheels can turn freely
• Parking brake released
• Selector lever in position N
• Ignition ON
• Press corresponding key in the system main menu to call up Actuator-Test functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.

Note:

During the last check in this actuator test (PRESSURE RELEASE function) - after the check of the return pump - a display inquires whether the wheel being checked can be turned.

Compared to previous requests in the actuator test, the wheel can only be turned at this point with more force than in previous checks. However, the wheel should in no case lock.

Test okay?

• Vehicle jacked-up so that the wheels can turn freely
• Parking brake released
• Selector lever in position N
• Ignition ON
• Press corresponding key in the system main menu to call up Actuator-Test functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.

Note:

During the last check in this actuator test (PRESSURE RELEASE function) - after the check of the return pump - a display inquires whether the wheel being checked can be turned.

Compared to previous requests in the actuator test, the wheel can only be turned at this point with more force than in previous checks. However, the wheel should in no case lock.

Test okay?

• Vehicle jacked-up so that the wheels can turn freely
• Parking brake released
• Selector lever in position N
• Ignition ON
• Press corresponding key in the system main menu to call up Actuator-Test functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.

Note:

During the last check in this actuator test (PRESSURE RELEASE function) - after the check of the return pump - a display inquires whether the wheel being checked can be turned.

Compared to previous requests in the actuator test, the wheel can only be turned at this point with more force than in previous checks. However, the wheel should in no case lock.

Test okay?

• Ignition ON
• Engine OFF
• Press corresponding key in the system main menu to call up Actuator-Test functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.

• Press soft key ON

ABS telltale ON

• Press soft key OFF

ABS telltale OFF

• Ignition ON
• Engine OFF
• Press corresponding key in the system main menu to call up Actuator-Test functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.

• Press soft key ON

ESP Telltale ON

• Press soft key OFF

Note:

Depending on the vehicle/system configuration it is possible that some data list parameters or test steps, although they are listed in this checking procedure, are not shown on the diagnostic tester display. In that case, these data list parameters are not valid for this vehicle/system configuration.

ESP Telltale OFF

• Vehicle jacked-up so that the wheels can turn freely
• Parking brake released
• Selector lever in position N
• Ignition ON
• Press corresponding key in the system main menu to call up Actuator-Test functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.

Note:

During the last check in this actuator test (PRESSURE RELEASE function) - after the check of the return pump - a display inquires whether the wheel being checked can be turned.

Compared to previous requests in the actuator test, the wheel can only be turned at this point with more force than in previous checks. However, the wheel should in no case lock.

-

Depending on the vehicle/system configuration it is possible that some data list parameters or test steps, although they are listed in this checking procedure, are not shown on the diagnostic tester display. In that case, these data list parameters are not valid for this vehicle/system configuration.

Test okay?

• Vehicle jacked-up so that the wheels can turn freely
• Parking brake released
• Selector lever in position N
• Ignition ON
• Press corresponding key in the system main menu to call up Actuator-Test functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.

Note:

During the last check in this actuator test (PRESSURE RELEASE function) - after the check of the return pump - a display inquires whether the wheel being checked can be turned.

Compared to previous requests in the actuator test, the wheel can only be turned at this point with more force than in previous checks. However, the wheel should in no case lock.

-

Depending on the vehicle/system configuration it is possible that some data list parameters or test steps, although they are listed in this checking procedure, are not shown on the diagnostic tester display. In that case, these data list parameters are not valid for this vehicle/system configuration.

Test okay?

• Vehicle jacked-up so that the wheels can turn freely
• Parking brake released
• Selector lever in position N
• Ignition ON
• Press corresponding key in the system main menu to call up Actuator-Test functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.

Note:

During the last check in this actuator test (PRESSURE RELEASE function) - after the check of the return pump - a display inquires whether the wheel being checked can be turned.

Compared to previous requests in the actuator test, the wheel can only be turned at this point with more force than in previous checks. However, the wheel should in no case lock.

-

Depending on the vehicle/system configuration it is possible that some data list parameters or test steps, although they are listed in this checking procedure, are not shown on the diagnostic tester display. In that case, these data list parameters are not valid for this vehicle/system configuration.

Test okay?

• Vehicle jacked-up so that the wheels can turn freely
• Parking brake released
• Selector lever in position N
• Ignition ON
• Press corresponding key in the system main menu to call up Actuator-Test functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.

Note:

During the last check in this actuator test (PRESSURE RELEASE function) - after the check of the return pump - a display inquires whether the wheel being checked can be turned.

Compared to previous requests in the actuator test, the wheel can only be turned at this point with more force than in previous checks. However, the wheel should in no case lock.

-

Depending on the vehicle/system configuration it is possible that some data list parameters or test steps, although they are listed in this checking procedure, are not shown on the diagnostic tester display. In that case, these data list parameters are not valid for this vehicle/system configuration.

Test okay?