|
Hydraulic Modulator Bracket, Remove and
Install
 Remove
| 1. |
Detach cover of brake fluid reservoir
|
| 2. |
Siphon out as much brake fluid as possible with siphon
bottle
|
| 3. |
Remove battery
| • |
Detach earth connection from earth terminal
| – |
Release 1x fastening nut
|
|
| • |
Detach positive connection from battery
|
| • |
If present: detach thermal protection
|
|
| 4. |
Remove battery support
| • |
For diesel engines: Detach preheater system control unit
(4)
|
| • |
Detach wiring harness plug (3)
|
| • |
Detach wiring harness
| – |
Disconnect 2x cable ties (1)
|
|
|
|
|
| 5. |
Detach coolant compensation tank
Note: Cooling system
remains sealed
| • |
Disconnect wiring harness plug
| – |
Set coolant compensation tank aside
|
|
|
| 6. |
Remove hydraulic modulator
| • |
Disconnect hydraulic modulator wiring harness plug
|
| • |
Detach 6x hydraulic line (2)
|
|
|
|
| 7. |
Detach hydraulic modulator bracket
| • |
Remove hydraulic modulator bracket
|
|
|
|
Install
| 8. |
Attach hydraulic modulator bracket
| • |
Insert hydraulic modulator bracket
|
|
| 9. |
Install hydraulic modulator
| • |
Attach 6x hydraulic line
| – |
Tighten 6x retaining bolt 14 Nm
|
|
| • |
Connect hydraulic modulator wiring harness plug
|
|
| 10. |
Attach coolant compensation tank to mounting
| • |
Connect wiring harness plug for coolant level sensor
|
|
| 11. |
Install battery support 15 Nm
| • |
For diesel engines: Attach preheater system control unit
|
| • |
Attach wiring harness plug
|
|
| 12. |
Install battery
| • |
Install battery bracket
|
| • |
If present: install thermal protection
|
| • |
Attach positive connection to positive terminal
|
| • |
Attach earth connection to earth terminal
|
|
| 14. |
Top up brake fluid reservoir to "MAX" marking
|
| 15. |
Screw cover on to brake fluid reservoir
|
| 16. |
Program volatile memory
|
|
