|
Test
|
Work Order Description
|
Nominal Value
|
|
T001
|
Check: Vehicle Configuration
|
|
Is the following information correct for the actual vehicle?
Z 13 DTH
|
|
|
|
|
T002
|
Check: Other system
|
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Data List
- Select the following Functional System on the diagnostic tester:
Electronic Diesel Injection System Multijet 6JO, Z 13 DTH
- Check the following data list parameters:
Actuator Tests
- Perform the following Actuator Tests:
Function Checks
After successful test/fault repair proceed to the next test step
|
|
|
|
|
T003
|
Check: Vehicle Configuration
|
|
Is the following information correct for the actual vehicle?
Z 18 XER
|
|
|
|
|
T004
|
Check: Other system
|
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Data List
- Select the following Functional System on the diagnostic tester:
Simtec 75, Z 18 XER
- Check the following data list parameters:
Actuator Tests
- Perform the following Actuator Tests:
Function Checks
After successful test/fault repair proceed to the next test step
|
|
|
|
|
T005
|
Check: Vehicle Configuration
|
|
Is the following information correct for the actual vehicle?
Z 14 XEL
Z 14 XEP
Z 12 XEP
|
|
|
|
|
T006
|
Check: Other system
|
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Data List
- Select the following Functional System on the diagnostic tester:
Motronic 7.6.1. Z 12 XEP, Z 14 XEP, Z 14 XEL
- Check the following data list parameters:
Actuator Tests
- Perform the following Actuator Tests:
Function Checks
After successful test/fault repair proceed to the next test step
|
|
|
|
|
T007
|
Check: Vehicle Configuration
|
|
Is the following information correct for the actual vehicle?
Z 16 XEP
Z 16 XE1
|
|
|
|
|
T008
|
Check: Other system
|
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Data List
- Select the following Functional System on the diagnostic tester:
Multec S (F), Z 16 XEP, Z 16 XE1
- Check the following data list parameters:
Actuator Tests
- Perform the following Actuator Tests:
Function Checks
After successful test/fault repair proceed to the next test step
|
|
|
|
|
T009
|
Check: Vehicle Configuration
|
|
Is the following information correct for the actual vehicle?
Z 18 XE
|
|
|
|
|
T010
|
Check: Other system
|
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Data List
- Select the following Functional System on the diagnostic tester:
Simtec 71.6, Z 18 XE
- Check the following data list parameters:
Actuator Tests
- Perform the following Actuator Tests:
Function Checks
After successful test/fault repair proceed to the next test step
|
|
|
|
|
T011
|
Check: Vehicle Configuration
|
|
Is the following information correct for the actual vehicle?
Z 17 DTL
Z 17 DTH
|
|
|
|
|
T012
|
Check: Other system
|
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Data List
- Select the following Functional System on the diagnostic tester:
Electronic Diesel Injection System EDC 16C9, Z 17 DTL, Z 17 DTH
- Check the following data list parameters:
Actuator Tests
- Perform the following Actuator Tests:
Function Checks
After successful test/fault repair proceed to the next test step
|
|
|
|
|
T013
|
Check: Vehicle Configuration
|
|
Is the following information correct for the actual vehicle?
Z 20 LEL
Z 20 LER
Z 20 LEH
|
|
|
|
|
T014
|
Check: Other system
|
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Data List
- Select the following Functional System on the diagnostic tester:
Motronic 7.6.1, Z 20 LEH, Z 20 LEL, Z 20 LER
- Check the following data list parameters:
Actuator Tests
- Perform the following Actuator Tests:
Function Checks
After successful test/fault repair proceed to the next test step
|
|
|
|
|
T015
|
Check: Vehicle Configuration
|
|
Is the following information correct for the actual vehicle?
Z 19 DTH
Z 19 DT
Z 19 DTL
|
|
|
|
|
T016
|
Check: Other system
|
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Data List
- Select the following Functional System on the diagnostic tester:
Electronic Diesel Injection System EDC 16C9/16C39, Z 19 DT, Z 19 DTH, Z 19 DTL
- Check the following data list parameters:
Actuator Tests
Function Checks
After successful test/fault repair proceed to the next test step
|
|
|
|
|
T017
|
Check: Vehicle Configuration
|
|
Is the following information correct for the actual vehicle?
Z 16 LET
A 16 LET
|
|
|
|
|
T018
|
Check: Other system
|
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Data List
- Select the following Functional System on the diagnostic tester:
Motronic 7.6.2, A 16 LET, Z 16 LET
- Check the following data list parameters:
Actuator Tests
- Perform the following Actuator Tests:
Function Checks
After successful test/fault repair proceed to the next test step
|
|
|
|
|
T019
|
Check: Vehicle Configuration
|
|
Is the following information correct for the actual vehicle?
Z 16 XER
|
|
|
|
|
T020
|
Check: Other system
|
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Data List
- Select the following Functional System on the diagnostic tester:
Simtec 75, Z 16 XER
- Check the following data list parameters:
Actuator Tests
- Perform the following Actuator Tests:
Function Checks
After successful test/fault repair proceed to the next test step
|
|
|
|
|
T021
|
Check: Vehicle Configuration
|
|
Is the following information correct for the actual vehicle?
Z 22 YH
|
|
|
|
|
T022
|
Check: Other system
|
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Data List
- Select the following Functional System on the diagnostic tester:
Simtec 81, Z 22 YH
- Check the following data list parameters:
Actuator Tests
- Perform the following Actuator Tests:
Function Checks
After successful test/fault repair proceed to the next test step
|
|
|
|
|
T023
|
Check: Vehicle Configuration
|
|
Is the following information correct for the actual vehicle?
Z 17 DTJ
Z 17 DTR
A 17 DTJ
A 17 DTR
|
|
|
|
|
T024
|
Check: Other system
|
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Data List
- Select the following Functional System on the diagnostic tester:
Electronic Diesel Injection System DECE1C, A 17 DTJ, A 17 DTR, Z 17 DTJ, Z 17 DTR
- Check the following data list parameters:
Actuator Tests
- Perform the following Actuator Tests:
Function Checks
After successful test/fault repair proceed to the next test step
|
|
|
|
|
T025
|
Checking Procedure Validity
|
- The selected Checking Procedure is not valid for this vehicle configuration.
|
|
|
|
