Replacing one piston / con-rod
Remove
2. |
Detach piston (3) from con-rod
• |
Clamp piston (4)
Note: Use protective
jaws
|
• |
Push out piston pin (2)
|
|
|
|
Install
3. |
Attach piston (2) to con-rod (3)
• |
Marking on piston head (1) and con-rod (4) point towards each
other
|
• |
Push in piston pin (5)
– |
Coat piston pin with engine oil.
|
|
• |
Insert new retainers (6) in ring groove of piston
Note: Note position of
ring joint. Ring joint must be within the range of measurement I
(max. 30°)
|
|
|
|
|