Replace oil pressure switch
Remove
2. |
Remove battery
• |
Detach earth connection (4) from battery
|
• |
Detach positive connection (3) from battery
|
|
|
|
3. |
Remove battery support.
• |
Remove pre-glow system control unit (4)
|
• |
Remove wiring harness plug (3)
|
• |
Detach wiring harness
– |
Detach 2x cable ties (1)
|
|
|
|
|
4. |
Place collecting basin underneath.
|
5. |
Unscrew oil pressure switch (1)
• |
Disconnect wiring harness connector.
|
|
|
|
Install
7. |
Tighten oil pressure switch 20.6
Nm
Note: Install oil
pressure switch with silicone sealing compound (light grey)
• |
Fix wiring harness plug
|
|
8. |
Install battery holder
• |
Attach pre-glow system control device
|
• |
Attach wiring harness plug
|
|
9. |
Install battery
• |
Attach earth connection to battery
|
• |
Attach positive connection to battery
|
|
10. |
Program volatile memories
|
|