|
Replace roller cam follower
Note: When working on
the fuel system, cleanliness must be strictly observed as even
small particles of dirt can lead to faults in the engine or fuel
system. The injectors may only be removed with the engine cold and
with unequivocal diagnosis.
 Remove
| 2. |
Remove roller cam follower
| • |
Remove 16x roller cam follower
|
|
|
|
| 3. |
Visually check components
| • |
16x hydraulic valve lifter
|
|
Install
| 4. |
Insert roller cam follower
| • |
Insert 16x roller cam follower
Note: Soak roller cam
follower in oil prior to installation.
|
|
Important: The camshafts must be
replaced when the roller cam followers are replaced.
|
| 5. |
Install both camshafts
|
|
