vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Oil Temperature, Measure > < Cylinder Head Oil Pressure Switch, Replace

Cylinder Block Oil Pressure Switch, Replace

  Remove

1.   Open bonnet
2.   Place collecting basin underneath.
3.   Remove oil pressure switch (1)
•   Detach heat protection sheath
Undo cable tie
•   Disconnect wiring harness connector.
Object Number: 2412892  Size: DEFAULT


  Install

4.   Install oil pressure switch 20 Nm
•   Use new seal ring
•   Fix wiring harness plug
•   Attach heat protection sheath
Attach cable ties
5.   Check engine oil level and correct if necessary
6.   Close bonnet

Oil Temperature, Measure > < Cylinder Head Oil Pressure Switch, Replace