vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Engine oil with oil filter change > < Oil Temperature, Measure

Oil Pressure, Check

Note:   Engine at operating temperature (oil temperature >= 80 °C).

  Remove

1.   Open bonnet
2.   Remove oil pressure switch
•   Disconnect oil pressure switch (2) wiring harness plug (1)
•   Detach oil pressure switch from cylinder head
3.   Attach KM-498-B (4) in combination with KM-135 (3)
4.   Oil Pressure, Check
•   Start engine.
•   The oil pressure should be approx 150 kPa (1.5 bar)
At idling speed and oil temperature >:80°C
•   Switch off engine
Object Number: 3446275  Size: DEFAULT


5.   Remove KM-498-B and KM-135

  Install

6.   Attach oil pressure switch to cylinder head 20 Nm
•   Use new seal ring
•   Connect oil pressure switch wiring harness plug
7.   Check engine oil level, correct if necessary
8.   Close bonnet

Engine oil with oil filter change > < Oil Temperature, Measure