vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Oil Pan, Remove and Install > < Engine oil with oil filter change

Oil Pressure Switch, Remove and Install

  Remove

1.   Open bonnet
2.   Remove oil pressure switch (1)
•   Disconnect wiring harness connector.
•   Place collecting pan underneath.
Object Number: 2410666  Size: DEFAULT


  Install

3.   Clean sealing surfaces.
4.   Install oil pressure switch
•   Use new seal ring
•   Tighten oil pressure switch 20 Nm
•   Fix wiring harness plug
5.   Check engine oil level, correct if necessary
6.   Close bonnet

Oil Pan, Remove and Install > < Engine oil with oil filter change