Replace front toothed belt cover (top)
Remove
2. |
1. |
Remove air cleaner housing - Z16XEP |
2. |
Remove air cleaner housing - Z16XE1 |
|
3. |
Detach front toothed belt cover (top) (1)
• |
Release upper catch (3)
|
• |
Pull front toothed belt cover (top) upwards by cast projection
(arrow), applying slight tension
|
|
|
|
Install
4. |
Attach front toothed belt cover (top)
Important: Ensure that it is
latched correctly
|
• |
Tighten 2x bolt 6 Nm
|
|
5. |
1. |
Install air cleaner housing - Z16XEP |
2. |
Install air cleaner housing - Z16XE1 |
|
|