vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Sheathed Glow Plugs, Replace > < Sheathed Glow Plugs, Replace

Control Unit for Pre-Heating System, Replace

  Remove

1.   Open bonnet
2.   Remove pre-glow system control unit (1)
•   Pull pre-heating system control unit out of bracket in direction of arrow
•   Disconnect wiring harness connector.
Object Number: 3446554  Size: DEFAULT


  Install

3.   Install pre-glow system control unit
•   Connect wiring harness plug
•   Insert pre-heating system control unit into bracket
4.   Close bonnet

Sheathed Glow Plugs, Replace > < Sheathed Glow Plugs, Replace