|
Oil Regulating Valve, Remove and Install
Important: When
working on the fuel system it is essential to pay attention to
cleanliness as even the smallest dirt particles can lead to faults
in engine operation or in the fuel system. Open fuel connections
must be sealed with appropriate plugs from the Opel Parts Catalogue
(catalogue number: 45 06 154 / part number: 9201697). Sealing plugs
are only intended to be used once.
 Remove
| 2. |
Disconnect battery
| • |
Detach earth connection from earth terminal
|
|
| 3. |
Remove engine cover (1)
| • |
Pull off engine cover
Note: Re-attach any
retaining rubbers (2) to the engine cover which may have become
detached
|
|
|
|
| 4. |
Remove pressure regulating valve (3) from pressure chamber
| • |
Disconnect wiring harness connector.
|
| • |
Unscrew pressure-regulating valve
| – |
Counterhold at hexagon (1)
|
|
|
|
|
Install
| 5. |
Install pressure-regulating valve in pressure chamber
| • |
Tighten pressure-regulating valve 60
Nm
|
| • |
Fix wiring harness plug
|
|
| 6. |
Connect battery
| • |
Attach ground connection to ground terminal
|
|
| 7. |
Fuel System, Check for Leaks
Important: Wear protective
goggles and protective gloves.
|
| • |
Start engine.
Note: Check fuel system
for escaping fuel.
|
|
| 9. |
Program volatile memories
|
|
