Replace crankshaft pulse generator
Remove
2. |
Disconnect battery
• |
Detach earth connection from earth terminal
|
|
3. |
Raise vehicle by its full height
|
4. |
Detach the lower engine cover and right engine splash guard
|
5. |
Remove crankshaft pulse generator (1)
• |
Disconnect wiring harness connector (3)
|
• |
Unscrew bolt (2) with EN-47631
|
|
|
|
Install
6. |
Install crankshaft pulse pick-up
• |
Coat seal ring with special grease (white)
|
• |
Fix wiring harness plug
|
|
7. |
Install lower engine cover and right engine splash guard
|
8. |
Lower vehicle by its full height
|
9. |
Connect battery
• |
Attach ground connection to ground terminal
|
|
10. |
Program volatile memories
|
|