vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Replacing the air cleaner housing > < Replacing the air cleaner housing

Replace air intake pipe

  Remove

1.   Open bonnet
2.   Remove engine cover (2)
•   Detach oil filler port closure cap (1)
•   Pull off engine cover
Note:   Rubber retainers (3) must remain on engine cover
•   Attach oil filler port closure cap
Object Number: 2412632  Size: DEFAULT


3.   Remove air intake manifold (1)
•   Detach wiring harness
Release 3x clip
•   Undo 2 clamps
•   Unscrew 2x bolts
Object Number: 2412653  Size: DEFAULT


  Install

4.   Install air intake pipe.
•   Fasten 2x clamp 3.5 Nm
•   Tighten 2x bolts
•   Attach wiring harness
Clip in 3x clips
5.   Install engine cover
•   Detach oil filler port closure cap
•   Refit engine cover
•   Attach oil filler port closure cap
6.   Close bonnet

Replacing the air cleaner housing > < Replacing the air cleaner housing