vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

B-013 ACTUATOR TEST > < B-011 Complaint: Oil / Coolant / Fuel-System

B-012 - Check: Functionality of Adjacent Systems

Customer complaint

Remedy

Cruise control defective

The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.

Data List

  • Select the following Functional System on the diagnostic tester:
    Electronic Diesel Injection System EDC 16C9/16C39, Z 19 DT, Z 19 DTH, Z 19 DTL
  • Check the following data list parameters:



After successful test/fault repair proceed to the next test step

Done:

Engine can not be switched off with the ignition lock

The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.

Function Checks

  • Check intake system for contamination by oil

Data List

  • Select the following Functional System on the diagnostic tester:
    Electronic Diesel Injection System EDC 16C9/16C39, Z 19 DT, Z 19 DTH, Z 19 DTL
  • Check the following data list parameters:

After successful test/fault repair proceed to the next test step

Done:

Engine telltale flashes / permanently ON

The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.

Data List

  • Select the following Functional System on the diagnostic tester:
    Electronic Diesel Injection System EDC 16C9/16C39, Z 19 DT, Z 19 DTH, Z 19 DTL
  • Check the following data list parameters:

    Diesel Particulate Filter
    Only if one of the above listed systems is installed, check the following parameters for correct function:
  • Select the following Functional System on the diagnostic tester:
    Electronic Diesel Injection System EDC 16C9/16C39, Z 19 DT, Z 19 DTH, Z 19 DTL
  • Check the following data list parameters:
  • Select the following Functional System on the diagnostic tester:
    IPC (Instrument)
  • Check the following data list parameters:

After successful test/fault repair proceed to the next test step

Done:

Air condition can not be switched ON

Perform the following tests in the given order until a defect is found.

Data List

  • Select the following Functional System on the diagnostic tester:
    Electronic Diesel Injection System EDC 16C9/16C39, Z 19 DT, Z 19 DTH, Z 19 DTL
  • Check the following data list parameters:



    -



After successful test/fault repair proceed to the next test step

Done:

Speedometer display defective

The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.

Data List

  • Select the following Functional System on the diagnostic tester:
    Electronic Diesel Injection System EDC 16C9/16C39, Z 19 DT, Z 19 DTH, Z 19 DTL
  • Check the following data list parameters:

After successful test/fault repair proceed to the next test step

Done:

Glow time telltale defective

The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.

Data List

  • Select the following Functional System on the diagnostic tester:
    Electronic Diesel Injection System EDC 16C9/16C39, Z 19 DT, Z 19 DTH, Z 19 DTL
  • Check the following data list parameters:

Function Checks

After successful test/fault repair proceed to the next test step

Done:

Glow time telltale flashes

The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.

Data List

  • Select the following Functional System on the diagnostic tester:
    Electronic Diesel Injection System EDC 16C9/16C39, Z 19 DT, Z 19 DTH, Z 19 DTL
  • Check the following data list parameters:

After successful test/fault repair proceed to the next test step

Done:





B-013 ACTUATOR TEST > < B-011 Complaint: Oil / Coolant / Fuel-System