|
Replace crankshaft pulse generator
 Remove
| 2. |
Disconnect battery
| • |
Detach ground connection from ground terminal
|
|
| 3. |
Raise vehicle by its full height
|
| 4. |
Detach the lower engine cover and right engine splash guard
|
| 5. |
Remove crankshaft pulse generator (1)
| • |
Disconnect wiring harness connector (3)
|
| • |
Unscrew bolt (2) with EN-47631
|
|
|
|
Install
| 6. |
Install crankshaft pulse generator
| • |
Coat seal ring with special grease (white)
|
| • |
Tighten bolt with EN-47631 9 Nm
|
| • |
Fix wiring harness plug
|
|
| 7. |
Install lower engine cover and right engine splash guard
|
| 8. |
Lower vehicle by its full height
|
| 9. |
Connect battery
| • |
Attach ground connection to ground terminal
|
|
| 10. |
Program volatile memories
|
|
