Replace switchover valve solenoid valve
Remove
2. |
Disconnect battery
• |
Detach earth connection from earth terminal
|
|
3. |
Raise vehicle by its full height
|
4. |
Detach the lower engine cover and right engine splash guard
|
5. |
Remove change-over valves (1) for solenoid valve
• |
Detach 2x vacuum line
Note: Mark vacuum
lines
|
• |
Detach wiring harness plug
|
• |
Unscrew 2x bolt 77.5x155L0011298]]
|
|
|
|
Install
7. |
Install change-over valves for solenoid valve
• |
Attach 2x vacuum line
Note: Pay attention to
marks
|
• |
Screw in 2x bolts
– |
Insert with locking compound (red)
|
|
• |
Attach wiring harness plug
|
|
8. |
Install lower engine cover and right engine splash guard
|
9. |
Lower vehicle by its full height
|
10. |
Connect battery
• |
Attach ground connection to ground terminal
|
|
11. |
Program volatile memories
|
|