Accelerator Pedal with Pedal Sensor, Remove and
Install
Remove
2. |
Remove lower instrument panel upholstery inner panelling
• |
Unclip 2x clips (arrows)
|
• |
Pull out inner panelling toward front
|
|
|
|
3. |
Disconnect wiring harness plug (2)
• |
Detach wiring harness plug in direction of arrow
|
|
4. |
Remove accelerator pedal module from bulkhead
|
|
|
Install
5. |
Attach accelerator pedal module to bulkhead
• |
Tighten 3x new nut 12 Nm
|
|
6. |
Connect wiring harness plug
• |
Lock wiring harness plug
|
|
7. |
Install lower instrument panel upholstery inner panelling
|
|