vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

B-014 ACTUATOR TEST > < B-012 Complaint: Engine Mechanic

B-013 - Check: Functionality of Adjacent Systems

Customer complaint

Remedy

Engine can not be switched off with the ignition lock

The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.

Data List

  • Select the following Functional System on the diagnostic tester:
    Electronic Diesel Injection System Multijet 6JO, Z 13 DTH
  • Check the following data list parameters:

Function Checks

  • Check intake system for contamination by oil
  • Check Engine Oil Level

After successful test/fault repair proceed to the next test step

Done:

Speedometer display defective

The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.

Data List

  • Select the following Functional System on the diagnostic tester:
    Electronic Diesel Injection System Multijet 6JO, Z 13 DTH
  • Check the following data list parameters:

After successful test/fault repair proceed to the next test step

Done:

No speed signal recognised

The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.

Data List

  • Select the following Functional System on the diagnostic tester:
    Electronic Diesel Injection System Multijet 6JO, Z 13 DTH
  • Check the following data list parameters:

After successful test/fault repair proceed to the next test step

Done:





B-014 ACTUATOR TEST > < B-012 Complaint: Engine Mechanic