|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Function Checks
- Verify mechanical system functions/components
Exhaust-gas turbo charger
Exhaust system
- Check air filter for fouling and correct mounting.
- Check air mass meter for fouling and correct mounting.
- Check intake system/charge air hoses for leaks (secondary air, porosity and blockages)
- Check connected hoses and tubes for kinks, damage etc.
Data List
- Select the following Functional System:
Electronic Diesel Injection System Multijet 6JO, Z 13 DTH
- Check the following data list parameters:
Perform the following troubleshooting:
After successful test/fault repair proceed to the next test step
Note:
Refer to Service Manual
|
|
