The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Fuses
- Check the following fuses for proper operation:
FE26 Fuse
- If fuse FE26 is defective:
Function Checks
Verify mechanical system functions/components
- Check exhaust system
(leakage, blockage)
- Check intake system/charge air hoses for leaks (secondary air, porosity and blockages)
- Check the hose clamps at the intake-air system / charge-air system for correct fitting.
- Check connected hoses and tubes for kinks, damage etc.
Perform the following troubleshooting:
After successful test/fault repair proceed to the next test step
|
|