Replace particle filter temperature sensor
Remove
1. |
Raise vehicle by its full height
|
2. |
Detach the lower engine cover and right engine splash guard
|
3. |
Unplug wiring harness plug of particle filter temperature
sensor (1)
• |
Unclip wiring harness from bracket
|
|
|
|
4. |
Unclip 7x wiring harness
• |
From rear engine damping block
|
|
5. |
Remove particle filter temperature sensor (1)
• |
Unscrew temperature sensor
|
|
|
|
Install
6. |
Install particle filter temperature sensor
• |
Fasten temperature sensor 30 Nm
|
|
7. |
7x clip in wiring harnesses
• |
To engine damping block (rear)
|
|
8. |
Connect wiring harness plug of particle filter temperature
sensor
• |
Clip wiring harness into bracket
|
|
9. |
Install lower engine cover and right engine splash guard
|
10. |
Lower vehicle by its full height
|
|