vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Engine Z13DTH, ECU - Trouble code U2105 set, crank no start > < Engine Z13DTH, ECU - Trouble code U2105 set, crank no start

Field Remedy: 2013

Subject: Engine Y/Z13DT/H/J - Bad cold start behavior at low ambient temperatures
Models: Engines: Option:
All 2004... Y13DT| Z13DT| Z13DTH| Z13DTJ
Complaint: Bad cold start behavior at low ambient temperatures. In some cases it takes up to 15 seconds to start the engine / or several starting procedures. Sometimes a kind of rattling noise is audible during start.
Cause: Problem caused by too low starter performance. Several investigations revealed that a starter is needed which runs engine RPM much faster through the resonance band of the dual mass flywheel.
Production: As of the following VINs new part has been introduced (for Z13DTH only) in production: - Eisenach: W0L0SDL0876086701; - Zaragoza: W0L0SDL6874229466; - Ellesmere Port: W0L0AHL4878073662; - Bochum: W0L0AHL4872134678; - Antwerp: W0L0AHL0875125881. As of engineno.: 2428727 (12.12.2007) the new starter has been introduced in produktion for Z13DT and Z13DTJ .

Remedy:

For Y13DTH and Z13DTH: 
In case of customer complaint please refer to Customer Satisfaction 
Programm 07-R-029 Corsa D, Astra H - Y/Z13DTH Starter.

For Y13DT, Z13DT and Z13DTJ:
In case of customer complaint advice customer to press clutch during 
starting procedure in order to detach additional inertia weight. Make 
sure that customer will follow the preheat phase and that always a 
fully charged battery is installed. If starting behaviour cannot be 
improved, install a modified starter (Part-No.: 93 192 995 / 
Cat.-No.: 90 98 031).

FunctionalGroup: J - Engine
Complaint Group: 08 - Hard to operate
Trouble Code: None

Engine Z13DTH, ECU - Trouble code U2105 set, crank no start > < Engine Z13DTH, ECU - Trouble code U2105 set, crank no start