|
Test
|
Work Order Description
|
Nominal Value
|
|
T001
|
Tester Display Fuel Pump Relay Test
|
|
|
|
- Press corresponding key in the system main menu to call up Actuator-Test functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
- Press soft key INACTIVE
|
|
|
|
Clicking noise from the relay
and
Fuel pump running
|
Concerned Terminals:
ECM: 19 (XC4)
|
|
|
|
T002
|
Tester Display Ignition Coil Test
|
|
Ignition ON
Engine OFF
- Connect test spark plug to spark plug socket for cylinder 1, 2, 3, 4
|
|
- Press corresponding key in the system main menu to call up Actuator-Test functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
Note:
Use only the appropriate Special Service Tool for removal of the ignition module.
|
Ignition sparks visible at test spark plug.
|
Concerned Terminals:
ECM: -
|
|
|
|
T003
|
Tester Display Fuel Tank Ventilation Valve Test
|
|
|
|
- Press corresponding key in the system main menu to call up Actuator-Test functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
|
Noise check:
Clicking noise from the actuator
|
Concerned Terminals:
ECM: 34 (XC3)
|
|
|
|
T004
|
Tester Display A/C Relay Test
|
|
|
|
- Press corresponding key in the system main menu to call up Actuator-Test functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
|
Test okay?
|
Concerned Terminals:
ECM: 51 (XC4)
|
|
|
|
T005
|
Tester Display Cooling Fan Test
|
|
|
|
- Press corresponding key in the system main menu to call up Actuator-Test functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
|
Test okay?
|
Concerned Terminals:
ECM: -
|
|
|
|
T006
|
Tester Display Compression Test
|
|
|
|
- Press corresponding key in the system main menu to call up Actuator-Test functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
|
|
|
|
|
|
|
Mechanical function check okay?
|
Concerned Terminals:
-
|
|
|
|
T007
|
Tester Display Malfunction Indicator (MI) Test
|
|
|
|
- Press corresponding key in the system main menu to call up Actuator-Test functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
|
|
|
|
|
|
|
Following component is switched on:
P3 Instrument
Telltale - Engine
|
Concerned Terminals:
IPC: -
|
|
|
|
T008
|
Tester Display Intake Manifold Valve 1 Test
|
|
|
|
- Press corresponding key in the system main menu to call up Actuator-Test functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
|
Test okay?
|
Concerned Terminals:
ECM: 2 (XC3)
|
|
|
