Vauxhall Workshop Service and Repair Manuals > Astra H > J Engine and Engine Aggregates | Fuel Injection Systems | Simtec 81 | Diagnostic Information and Procedures | Diagnostic Procedures | Simtec 81, Z 22 YH | C-xx Fault Isolation Procedures

C-035 - Injector Circuit

Test

Work Order Description

Nominal Value

T001

Check: Component

Check the following component for correct installation:
A84 Control Unit - Engine

Test okay?

Yes:

No:

Result	Cause Of Fault
E001	Result: Defective Component
	The fault causes merely an entry in the fault memory, the system behaviour will not be influenced. The control unit should only be replaced in agreement with the customer. Note: Trouble code P0200 is also set under the following conditions: Temperature inside the control unit box is too high.

E002	Result: Mechanical Fault
	Adjust the installation of the following component: A84 Control Unit - Engine