vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Replace intake manifold switchover valve control motor > < Coolant Temperature Sensor, Replace (Z 22 YH, RHD)

Astra H

Replace camshaft sensor

  Remove

1.   Open bonnet
2.   Remove air cleaner housing (4)
•   If present: unclip bonnet contact switch (1)
•   Unscrew bolt (2)
•   Unclip tank vent line (3)
•   Release and disconnect wiring harness plug of hot film mass air flow meter (7)
– Unclip wiring harness (6) from bracket
•   Detach intake pipe
– Loosen clamp (5)
Object Number: 8230491 Size: DEFAULT


3.   Remove camshaft sensor
•   Release and unplug wiring harness plug (1)
•   Unscrew bolt (2)
Object Number: 2406420 Size: DEFAULT


  Install

4.   Install camshaft sensor
•   Tighten bolt 8 Nm
•   Connect and lock wiring harness plug
5.   Install air cleaner housing
•   Install intake pipe
– Fasten clamp 3.5 Nm
•   Tighten bolt
•   Connect and lock wiring harness plug of hot film mass air flow meter
•   Clip in tank vent line
•   If present: clip in bonnet contact switch
6.   Close bonnet

Replace intake manifold switchover valve control motor > < Coolant Temperature Sensor, Replace (Z 22 YH, RHD)