Replace charge pressure sensor
Remove
3. |
Remove EGR valve
• |
Unscrew 2x bolts
– |
EGR metal tube to throttle valve module (1)
|
|
• |
Unscrew 2x bolts
– |
Exhaust gas recirculation (EGR) cooler (4)
|
|
• |
Remove 2x engine transport shackle seal (2)
|
|
|
|
4. |
Remove charge pressure sensor (2)
• |
Disconnect wiring harness plug (1)
|
|
|
|
Install
5. |
Install charge pressure sensor
• |
Fix wiring harness plug
|
|
6. |
Install EGR valve
• |
Replace 2x seal; fit engine transport shackle
|
• |
Tighten 2x bolt 25 Nm
– |
EGR metal tube to throttle valve module
|
|
• |
Tighten 2x bolt 25 Nm
– |
Exhaust gas recirculation (EGR) cooler
|
|
|
|