|
Removing and installing turbocharger oil feed line
(cylinder block)
 Remove
| 1. |
Remove engine splash guard (5).
|
| 2. |
Detach union nut (4) from turbocharger oil feed line
(turbocharger)
Note: Place collecting
basin underneath.
|
| 3. |
Detach bracket (3) from cylinder block
|
| 4. |
Detach union nut (1) from cylinder block flange and remove
turbocharger oil feed line (cylinder block) (2)
|
|
|
Install
| 5. |
Insert turbocharger oil feed line (cylinder block) and attach
to cylinder block flange with union nut 20
Nm
|
| 6. |
Attach turbocharger oil feed line union nut (cylinder block) to
turbocharger oil feed line (turbocharger) 20 Nm
|
| 7. |
Attach turbocharger oil feed line bracket to cylinder block
35 Nm
|
| 8. |
Attach lower engine compartment cover
|
|
