|
Adjust selector lever actuation cable (AF17 /
AF22)
 Remove
| 1. |
Move selector lever through all the positions and back
again
Note: Actuation lever
on transmission must engage in each case: "P" (most forward
position (2), R, N (1), D, 3, 2, 1.
| • |
Change gear from "P" to "1"
|
| • |
Change gear from "1" to "P"
|
|
|
|
| 2. |
Remove battery and battery support 
|
| 3. |
Open locking clamp (1) on selector actuation cable
| • |
Open upwards with small screwdriver
|
|
|
|
Install
| 4. |
Adjust selector actuation cable
Important: Ensure that the
selector lever engages correctly in the "P" position by moving the
selector lever forwards and backwards without pressing the locking
button.
|
| • |
Move selector lever to the "P" position
|
| • |
Turn actuation lever (1) on the transmission as far as the stop
(position "P") (2)
|
| • |
Engage pawl in parking lock wheel
|
|
|
|
| 5. |
Close locking clamp (1) on selector actuation cable
|
|
|
| 6. |
Install battery and battery support
|
| 7. |
Program volatile memories
|
|
