Vauxhall Workshop Service and Repair Manuals

Test

Work Order Description

Nominal Value

Check: Vehicle Configuration

Is the following information correct for the actual vehicle?

Check: Other system

The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.

Data List

• Select the following Functional System on the diagnostic tester:
  Simtec 81, Z 22 YH
• Check the following data list parameters:
  
  
  
  -
  
  
  

Perform the following troubleshooting:

After successful test/fault repair proceed to the next test step

Invalid / not supported vehicle configuration

• The selected Checking Procedure is not valid for this vehicle configuration.