vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
C-009 Selector Position Switch Circuit > < C-007 Automatic Transmission Colour and Particle Check

Astra H

C-008 - Electrical Selector-Lever Lock Circuit

Test

Work Order Description

Nominal Value
T001

Check: Short to Voltage of Signal Circuit
  • Ignition OFF
  • Disconnect wiring harness connector:
    S21 Assembly - Selector Control
  • Ignition ON
  • Measure voltage between the following terminals:
    S21 Assembly - Selector Control
    Wiring harness connector (wiring harness side) wiring colour BNGY
    &
    Ground

Note:

Wiring colours: BK=Black, BN=Brown, BU=Blue, GD=Gold, GN=Green, GY=Grey, OG=Orange, PK=Pink, RD=Red, SR=Silver, TQ=Turquoise, VT=Violet, WH=White, YE=Yellow,
L=Light, D=Dark

less than 0.3 V
Voltage Measurement Current Value: V
Yes: No:
T002

Check: Interruption of Signal Circuit
  • Brake pedal actuated
  • Measure voltage between the following terminals:
    S21 Assembly - Selector Control
    Wiring harness connector (wiring harness side) wiring colour BNGY
    &
    Ground

Note:

Wiring colours: BK=Black, BN=Brown, BU=Blue, GD=Gold, GN=Green, GY=Grey, OG=Orange, PK=Pink, RD=Red, SR=Silver, TQ=Turquoise, VT=Violet, WH=White, YE=Yellow,
L=Light, D=Dark

greater than 11 V
Voltage Measurement Current Value: V
Yes: No:
T003

Check: Interruption of Signal Circuit
  • Ignition OFF
  • Measure voltage between the following terminals:
    S21 Assembly - Selector Control
    Wiring harness connector (wiring harness side) wiring colour BN
    &
    Battery voltage

Note:

Wiring colours: BK=Black, BN=Brown, BU=Blue, GD=Gold, GN=Green, GY=Grey, OG=Orange, PK=Pink, RD=Red, SR=Silver, TQ=Turquoise, VT=Violet, WH=White, YE=Yellow,
L=Light, D=Dark

greater than 11 V
Voltage Measurement Current Value: V
Yes: No:
T004

Check: Interruption of Signal Circuit
  • Ignition OFF
  • Remove electrical component from socket:
    K93 Relay - Unlock Selector Lever
  • Ignition ON
  • Measure voltage between the following terminals:
    K93 Relay - Unlock Selector Lever
    Socket Terminal 30
    &
    Ground

greater than 11 V
Voltage Measurement Current Value: V
Yes: No:
T005

Check: Interruption of Signal Circuit
  • Measure voltage between the following terminals:
    K93 Relay - Unlock Selector Lever
    Socket Terminal 86
    &
    Ground

greater than 11 V
Voltage Measurement Current Value: V
Yes: No:
T006

Check: Short to Voltage of Signal Circuit

Remove electrical component from socket:

K93 Relay - Unlock Selector Lever
  • Measure voltage between the following terminals:
    K93 Relay - Unlock Selector Lever
    Socket Terminal 85
    &
    Ground

less than 0.3 V
Voltage Measurement Current Value: V
Yes: No:


Result

Cause Of Fault
E001 Result: Interruption
  • Circuit interruption between:
    S21 Assembly - Selector Control
    Wiring harness connector (wiring harness side) wiring colour BNGY
    &
    Y1_S21 Lifting Magnet - Unlock Selector Lever
    Wiring harness connector colour YE
    or
    Y1_S21 Lifting Magnet - Unlock Selector Lever
    Wiring harness connector colour RD
    &
    S1_S21 Switch - Unlock Selector Lever
    Wiring harness connector colour RD
    or
    S1_S21 Switch - Unlock Selector Lever
    Wiring harness connector colour BN
    &
    S21 Assembly - Selector Control
    Wiring harness connector (wiring harness side) wiring colour BN

or

  • Defective component:
    Y1_S21 Lifting Magnet - Unlock Selector Lever
    or
    S1_S21 Switch - Unlock Selector Lever

Note:

Wiring colours: BK=Black, BN=Brown, BU=Blue, GD=Gold, GN=Green, GY=Grey, OG=Orange, PK=Pink, RD=Red, SR=Silver, TQ=Turquoise, VT=Violet, WH=White, YE=Yellow,
L=Light, D=Dark

E002 Result: Interruption
  • Circuit interruption between:
    S21 Assembly - Selector Control
    Wiring harness connector (wiring harness side) wiring colour BN
    &
    Ground

Note:

Wiring colours: BK=Black, BN=Brown, BU=Blue, GD=Gold, GN=Green, GY=Grey, OG=Orange, PK=Pink, RD=Red, SR=Silver, TQ=Turquoise, VT=Violet, WH=White, YE=Yellow,
L=Light, D=Dark

E003 Result: Interruption
  • Circuit interruption between:
    K93 Relay - Unlock Selector Lever
    Socket Terminal 87
    &
    S21 Assembly - Selector Control
    Wiring harness connector (wiring harness side) wiring colour BNGY

Note:

Wiring colours: BK=Black, BN=Brown, BU=Blue, GD=Gold, GN=Green, GY=Grey, OG=Orange, PK=Pink, RD=Red, SR=Silver, TQ=Turquoise, VT=Violet, WH=White, YE=Yellow,
L=Light, D=Dark

E004 Result: Interruption
  • Circuit interruption between:
    FE29 Fuse
    Output contact
    &
    K93 Relay - Unlock Selector Lever
    Socket Terminal 86
E005 Result: Interruption
  • Circuit interruption between:
    S218 Switch - Stop Lamp, Double
    Wiring harness connector (wiring harness side) terminal 2
    &
    K93 Relay - Unlock Selector Lever
    Socket Terminal 30
E006 Result: Short to Voltage
  • Short circuit to voltage between:
    K93 Relay - Unlock Selector Lever
    Socket Terminal 87
    &
    S21 Assembly - Selector Control
    Wiring harness connector (wiring harness side) wiring colour BNGY

or

  • Defective component:
    K93 Relay - Unlock Selector Lever

Note:

Wiring colours: BK=Black, BN=Brown, BU=Blue, GD=Gold, GN=Green, GY=Grey, OG=Orange, PK=Pink, RD=Red, SR=Silver, TQ=Turquoise, VT=Violet, WH=White, YE=Yellow,
L=Light, D=Dark

E007 Result: Short to Voltage
  • Short circuit to voltage between:
    S218 Switch - Stop Lamp, Double
    Wiring harness connector (wiring harness side) terminal 2
    &
    K93 Relay - Unlock Selector Lever
    Socket Terminal 30

or

  • Defective component:
    S218 Switch - Stop Lamp, Double





C-009 Selector Position Switch Circuit > < C-007 Automatic Transmission Colour and Particle Check