|
Rear Ring Gear Assembly with Freewheel F0, Remove
and Install (AF17)
 Remove
| 2. |
Remove multi-plate clutch assembly C1 
|
| 3. |
Remove multi-plate clutch assembly C0 and C3
|
| 4. |
Remove rear ring gear with freewheel F0 (3)
| • |
Remove thrust washer (1)
|
| • |
Remove axial needle bearing (2)
|
| • |
Remove rear ring gear with freewheel F0 upward (arrow) out of
transmission.
|
| • |
Remove thrust washer (5)
|
| • |
Remove axial needle bearing (4)
|
|
|
|
Install
| 5. |
Install rear ring gear with freewheel F0 (5)
| • |
Install friction washer (2) and axial needle bearing (1)
| – |
Position on rear ring gear with freewheel F0 using assembly
grease
|
|
| • |
Install thrust washer (3)
|
| • |
Install needle bearing (4)
|
|
|
|
| 6. |
Install multi-plate clutch assembly C0 and C3
|
| 7. |
Install multi-plate clutch assembly C1
|
|
