Solenoid Valves or Pressure Regulator, Remove and
Install (AF17)
Note: The pressure
regulator cannot be supplied separately and in the event of a fault
must be replaced together with the valve body.
Remove
1. |
Detach valve body cover from transmission
|
2. |
Remove solenoid valve
1. |
Solenoid valve for neutral switching |
2. |
Pressure regulator |
3. |
Solenoid valve, 2-3 gear |
4. |
Solenoid valve, 1-2/3-4 gear |
5. |
Converter clutch solenoid valve |
• |
Disconnect wiring harness plug
|
|
|
|
Install
3. |
Install solenoid valve
• |
Connect wiring harness plug
|
|
|
|
4. |
Attach valve body cover to transmission
|
|