|
The engine stalls when the car stops
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Data List
- Select the following Functional System on the diagnostic tester:
MTA (Easytronic) (F13-5MTA/F17-5MTA)
- Check the following data list parameters:
Additional Functions
- Select the following Functional System on the diagnostic tester:
MTA (Easytronic) (F13-5MTA/F17-5MTA)
- Perform the following Additional Functions:
Perform the following troubleshooting:
After successful test/fault repair proceed to the next test step
|
