|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Data List
- Select the following Functional System on the diagnostic tester:
MTA (Easytronic) (F13-5MTA/F17-5MTA)
- Check the following data list parameters:
- Select the following Functional System on the diagnostic tester:
ABS/TC/ESP (Vehicle Dynamic System)
- Check the following data list parameters:
Programming
- Perform the following programming:
- After programming successfully, check if the system malfunction is still present.
- If the malfunction is still present, perform the following test step:
Perform the following troubleshooting:
After successful test/fault repair proceed to the next test step
|
|
