Vehicle does not reach it's top speed or reaches it's top speed delayed
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Data List
- Select the following Functional System on the diagnostic tester:
MTA (Easytronic) (M20-6MTA/M32-6MTA)
- Check the following data list parameters:
-
-
-
Additional Functions
- Perform the following Additional Functions:
Mechanical function check
- Check the following component for proper operation:
Clutch
After successful test/fault repair proceed to the next test step
|