Bearing for main and drive shaft in transmission
case, remove+install (F13+/F13+ MTA)
Note: Transmission
remains installed.
Remove
|
3. |
Remove needle bearing drive shaft (3) from transmission
case
• |
Remove needle bearing with KM-556-A
(1) and MKM-599 (2)
|
|
4. |
Remove roller bearing main shaft (4) from transmission case
• |
Remove roller bearing with KM-556-A
(6) and KM-556-2 (5)
|
|
|
Install
|
5. |
Install main shaft roller bearing (3) in transmission case
• |
Drive roller bearing in with KM-454-3
(5) and KM-454-4 (4) flush
|
|
Important: Inscribed side of
needle bearing points to transmission.
|
6. |
Install drive shaft needle bearing (2) in transmission case
• |
Drive needle bearing in with KM-454-2
(6) and KM-454-4 (1) flush
|
|
|
|