vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Replace clutch position sensor (M20 MTA) > < Replace high-pressure line - gearshift module to clutch module (M20 MTA)

Replace output speed sensor (M20 MTA)

  Remove

1.   Remove transmission output speed sensor
•   Release wiring harness plug (2) and disconnect
•   Unscrew bolt (1)
•   Remove sensor
Object Number: 10680895  Size: DEFAULT


  Install

2.   Install transmission output speed sensor
•   Replace seal ring
•   Insert transmission output speed sensor
•   Tighten bolt (1) 10 Nm
•   Connect and lock wiring harness plug (2)
Object Number: 10680895  Size: DEFAULT


Replace clutch position sensor (M20 MTA) > < Replace high-pressure line - gearshift module to clutch module (M20 MTA)